HomeSeasonal Gifts Planes & KitsMotors & ESC'sReceiversBatteriesProps Prop AdaptersAccessoriesRC Light KitsServos & HornsPhotos & VideosDirectionsMercury GlueContact UsAbout Lazertoyz

You are Visitor #  

 

 LINKS

 

RC NIGHT FLY

Ravenna Thunderbirds

STLFLYER.COM

How to Fly RC

SLYTEST

55 Chevy

Hot Air Balloon

RCTOOLBOX

 

   

My T-28 Trojan

RC LIGHTING SYSTEMS

 

New LOW COST " LITE RC Lighting system"

 

Want RC Lights ?

Plug the Lazertoyz RC LITE Controller into a receiver just like a servo.

Uses very low amperage from the 5 Volt power from your Receiver

Then you can use your R/C radio Transmitter to control the "RC LITE SYSTEM"

Low Power,  Extremely Bright. YES ! Switch or Joystick controllable while flying !

Turn on your lights while flying and your landing lights on final approach ..

Now how cool is that ?

 

 

With 4 LED outputs -  Control  Up to 20 or more LED'S

 

Completely pre-wired with 4 or 5 Ultra Bright LED's ! Extras Available to expand your lighting

 

Pre-wired LED RC Lights Specs.

    red 25,000 MCD  25 deg angle

  green 25,000 MCD 25 deg angle

  white 55,000 MCD 25 deg angle

 

 One each of Red & Green position lights , and 2 white LED's (1-landing and 1- strobe) !

Add more LED's  for $2.00 each. Use up to 20 LED's

 

           Weight of 4 light V2 system is only  .3 OZ - 8 grams       

                     Current draw with 6 lights on solid is  0.14 amps 

MODES AVAILABLE WHEN FLYING **** 1. Strobe Only - Solid on
2. Strobe - 3 blink 3. Strobe Solid On & Solid On Position Lights - Red &  Green
4. Blinking  Position Lights - Red &  Green & Blinking Strobe 5. Landing lights- solid on Red Green & Strobe Blinking
6. Landing lights- solid All Lights On Solid

 

 

The Videos below show the difference between the V2 and the V3 Control over the position lights.

 

V2 VIDEO On Gear Switch     V2 VIDEO On Joystick     V3 Video   New V2 Video

 

 

V2 gives you control from your transmitter over the strobe(white) & position lights (Red and Green)

By turning them on & off solid or blinking along with the landing light (only one)  on and off.

 

V3 is control over landing lights only, the strobe blinks continuously, the position lights are on solid and you control the landing lights ( 2 of them) on and off.

Both of our RC light systems are capable of adding up to 20 lights to them. You may also Change Colors (say you want a RED Strobe instead of white)

To add new lights just use the same color light and connect it in parallel (Yellow wire to Yellow and White to White)

 

 

Click for Full  V2 RC LITE SYSTEM Lighting data Sheet

Radio Controlled lighting system ready to plug into your receiver with 4 pre-wired 26" leads and  LED's

V2 RC Lite System $29.00

 

                                               The  Blade CX with V3 Kit and lights in clear straws on the landing gear, landing lights in the body, strobe on tail

 


NEW V3 Kit allows for simple operation (strobe, position lights, are on all the time, the landing lights can be turned on and off in flight)

 

  Works Just like the V2 Kit Just Plugs in to your receiver   V3 Operation Video

 

1 Red led 25,000 MCD  and 1 Green led 25,000 MCD Position Lights on Solid all the time

1 "3 blink Strobe" 55,000 MCD led on all the time (blinks 3 times then a pause)

2 Landing lights white led 55,000 MCD controlled by radio ( joystick or switch )

 

Each Light has 26" of wire -easily extended to your length.

Bright Light viewing angle is 25 deg.to increase that use a Diffuser lens available below.

 

(Email me for a quote on a Custom Wire Lengths )E-Mail Dan -

  The The 26" kits will work well on up to a 42" Wingspam Plane, The V3 56" wire Kit below will fit up to 100" wingspan plane

 

V3 5 LED KIT - 26" leads

 

 1 Strobe,1 Red, 1 Green and 2 White Landing -

V3 RCLITES 26" wire lengths designed for under 42" wingspan planes

JUST $32.00

 

NEW! V3 *   56" wire RC LITE KIT

 5 LEDS - 25,000+ MCD ULTRA BRIGHT LED KIT

1 Strobe,1 Red, 1 Green and 2 White Landing - V3 RC LITES 56" wire lengths -NOW LIGHTING FOR 80" CUBS and Planes up to -100" wingspan

JUST $39.00

 

 

Yes ! you can Add more Lights Click Below for video

 How to add more LED's<<<<<<<  VIDEO

 

Additional Ultra Bright LED with 26" of 30 awg Wire

Pre-Wired and insulated to LED

  Pre-Wired LEDS Just $2.00 each

Just add in parallel with the same color light and wire yellow to yellow and white to white- mixing colors will cause one light to be less bright than the other.

 

Pick your Color Here>

  New LED Mounts/Diffuser Mounts in a .25 in hole

Green, Red, Yellow, or Clear Diffusers Just .50 each

Color

LIGHT KIT ACCESSORIES

Black LED mounts  Just .50 each

30 AWG Wire -   (equal length of yellow and white) 1.00 per foot (just order as many feet as you like it will be a continuous length) $1.00

  3/64 Shrink tube for 30 awg wire  $1.00

 

New MAXI-LIGHT KIT

Limited quantities available    $29.00 each

Email me for details - Lights and connectors sold separately

Channel Low -100 (1ms) Center 0 (1.5ms) High +100 (2ms)
OUTPUT      
1   Solid On Solid On
2     Solid On Landing
3   Solid On Solid On
4 Solid On Solid On Solid On
5   1Blink Strobe  
6   1Blink (different timing than 5)
7   2 Blink Strobe  
8     Solid On Landing
9     Solid On Landing
10     Solid On Landing
Each Output Channel Can be a Different Color  
You can add more LED Lights on each Output (but they must be the same color)      
20 lights max (more with an added BEC)  10 on each output max  

Custom Configure your  lights !

Click here to buy and for Specs

How to our LED Kits and make a "Light Tube"

Acquire a drinking straw that's just under 3/8 dia. (ARBY's straws work great) snap the mount without the locking ring on the led then tilt and insert in the straw . AWESOME LIGHTING ! You may insert a diffuser in the other end of the straw.. hot-glue with just a dab.

George P Says ..

Your lights are fabulous!  You configured everything exactly as I wanted and I’m super, duper happy.  Plus, I get tons of complements every time I’m out flying.  I just tell everyone; Lazertoyz.com, baby!!

 We say NICE JOB George !  George used a V3 Kit with 2 extra Green Leds for the twin cockpit he made.He swaped the white LED for a Red Led and added a second red position light.

(if you swap out the strobe output to a different color led it will strobe , the strobing is generated by the controller not the led) 

Dans Mini Arrow Nightflyer below.